
Gibsonton Cabinet Refacing Pros
Cabinet Refacing in Gibsonton, FL
Cabinet Refacing in Gibsonton, FL: new doors, veneer, and hardware over existing boxes. No full remodel. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Gibsonton and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Cabinet Refacing cost Gibsonton: what homes and businesses can expect
Cabinets take the brunt of a kitchen's age. Doors fade. Boxes sit crooked next to newer appliances. Thermofoil lifts at the edges.
Gibsonton Cabinet Refacing Pros fixes that without gutting the kitchen. Gibsonton grew from roughly 14,000 to over 18,000 residents in a decade. Older kitchens now sit right next to brand-new builds, and each needs a different kind of attention. We put new doors, veneer skins, and hardware over boxes that are still structurally sound, which covers most homes in this town. Contact us or see About to learn how estimates work.

What we do
Cabinet Refacing services
Cabinet Refacing across Gibsonton and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet Refacing in Gibsonton, FL. New doors, veneer skins, and hardware over your existing boxes. Free in-home estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen Cabinet Refacing in Gibsonton, FL covering base, wall, and island cabinets. Free estimates, matched finishes.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Gibsonton, FL with moisture-resistant finishes, new doors, and sealed edges. Free estimates.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Gibsonton, FL. New shaker, raised panel, or flat panel doors fitted to existing boxes. Free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Gibsonton, FL with sprayed conversion finishes built to resist humidity peeling. Free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Gibsonton, FL for non-standard openings and exact finish matching. Free estimates and in-home measuring.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Gibsonton, FL to match or update a standalone island. Panel veneer, doors, and hardware. Free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Gibsonton, FL for bubbling, curling cabinet doors caused by heat and humidity. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Gibsonton Cabinet Refacing Pros
Written estimates before anything is touched
You get a scope and a price range before a door comes off its hinges.
Materials picked for Hillsborough County humidity
Door and veneer choices get selected with moisture in mind, not just color.
Box condition checked first
We confirm the boxes are solid before quoting, so the number holds up.
Built for Gibsonton's mixed housing stock
Older boxes and newer builds get different prep, and we plan for both.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist walks the kitchen, checks box condition, and talks through what you want it to look like.
Step 2Measurement & Design
Exact measurements get taken on-site so door sizes and layout adjustments fit the first time.
Step 3Material Selection
You pick veneer, finish, and hardware from physical samples, not a photo on a screen.
Step 4Surface Preparation
Boxes get cleaned, sanded, and any soft spots repaired before new material goes anywhere near them.
Step 5Refacing Installation
New veneer, doors, and panels get fitted to the frames you already have.
Step 6Final Walkthrough
Every door and drawer gets checked for alignment and smooth action before we call it done.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing cost Gibsonton FL
Boxes stay in place, so the cost drops well below full replacement. These are rough ranges. An exact number comes after we look at your boxes in person. Book a free in-home estimate and we'll give you a real number for your kitchen, not a range.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only swap | $1,800–$5,000 | new doors and drawer fronts on existing boxes. |
| Standard kitchen reface | $4,500–$12,000 | veneer skins, new doors, and hardware across a full kitchen. |
| Full kitchen with island | $8,000–$18,000 | includes matched island refacing and upgraded soft-close hardware. |
| Single vanity reface | $900–$2,500 | doors, drawer fronts, and sealant for one bathroom vanity. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods built for Florida humidity
Coastal humidity near Apollo Beach and Ruskin pushes material choice toward anything that resists lifting and swelling at the edge.

Wood Veneer Sheets
A thin wood veneer goes over the existing box for a natural grain look without replacing the frame.

Laminate Finishes
Laminate holds up to daily wear and wipes clean fast, a practical pick for busy kitchens.

Solid Wood Doors
Solid wood fronts swap in for tired doors and hold their shape longer than veneer alone.

Cabinet Hardware
Knobs, pulls, and hinges get matched to whatever direction the new doors take.

Soft-Close Hinges
Upgraded hinges stop slamming and close quiet, every time.

Protective Topcoat
A clear sealant coat keeps moisture and daily wear off the finished surface.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
Most projects move from first call to finished kitchen in a few weeks. Install itself only takes a few days.
- 01
Consult and measure
same day - 02
Door and finish order
1–2 weeks - 03
Install
2–4 days - 04
Final walkthrough
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance for cabinet refacing
Always verify specifics with Hillsborough County before scheduling, since requirements can shift by project scope.
| Typically needs a permit | Often no permit |
|---|---|
| Moving plumbing or gas lines near the sink or dishwasher | Door and drawer front swaps on existing boxes |
| Electrical rewiring for new outlets or under-cabinet lighting | Veneer skins applied over existing cabinet surfaces |
| Structural changes to cabinet box framing or layout | Hardware and soft-close upgrades |
| — | Paint or finish refinishing |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Swapping a single door's hardware. | Full veneer bonding across multiple cabinet runs. |
| Touching up one door's finish on a solid box. | Box alignment work where doors need to sit flush. |
| Replacing a worn pull or knob set. | Any job spanning a whole kitchen or island. |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Call (727) 591-5321 or request a free estimate when any of these sound familiar.
- Thermofoil edges are peeling or curling near the sink.
- Cabinet boxes feel swollen or soft near the dishwasher.
- Doors no longer close flush against the frame.
- You want a new look without tearing out working cabinetry.
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Gibsonton and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Riverview · Palm River-Clair Mel · Balm · Bloomingdale · Brandon · Fish Hawk · Wimauma · Valrico · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say
Nancy H.
5 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for basic refinishing/refinishing touch-ups. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Gibsonton, FL

Richard H.
1 week ago
5 out of 5 starsCalled Gibsonton Cabinet Refacing Pros after a neighbor tip in Gibsonton. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our cabinet door replacement.
Symmes, FL

Elizabeth A.
3 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the cabinet refacing turned out better than I pictured.
Gibsonton Historic District, FL
Common questions
Cabinet Refacing FAQs
What is the most expensive part of redoing a kitchen?
Cabinetry is usually the single biggest line item in a kitchen remodel, more than countertops or flooring. That's exactly why refacing exists: it keeps the boxes you already have and replaces only the doors, drawer fronts, and surfaces, cutting the cost without cutting the result.
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak and dark cherry finishes are reading dated fast. Shaker-style doors in warm white, soft greige, or two-tone layouts (painted base, wood-tone uppers) are what we're installing most right now.
Do you need a permit to remodel a kitchen in Florida?
It depends on the work. Moving plumbing, gas lines, or electrical circuits generally needs a permit through Hillsborough County. Swapping doors, veneer, or hardware on existing boxes usually doesn't. Check our permits section below.
How can I update my old kitchen cabinets without replacing them?
Refacing is the answer. New doors, drawer fronts, and veneer skins go over your existing boxes, so the layout and plumbing stay put while the look changes completely.
How much does Cabinet Refacing cost in Gibsonton?
Most jobs land between $3,500 and $15,000 depending on kitchen size, door material, and box condition. See the cost breakdown below for specific tiers.
How long does Cabinet Refacing take?
A typical kitchen runs about 1-2 weeks from measure to final install, with most of that time spent waiting on custom doors to arrive. Install itself usually takes 2-4 days.
Do I need a permit for Cabinet Refacing?
Standard door and veneer refacing typically doesn't require a permit since the box structure, plumbing, and electrical stay untouched. If your project involves moving outlets or reworking cabinet framing, that's a different story.
Is DIY Cabinet Refacing a good idea?
For a single door or a hardware swap, sure. For full veneer bonding across a kitchen, box alignment and adhesive cure matter more than most DIYers expect, especially with Florida humidity working against a weak glue line.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Gibsonton.
